Help: PVE Install OpenWRT and Akeo - Can't Access Internal Network

admin

I recently bought a new small server and the old one is no longer used. Now it can be opened from the internal machine of the company. I can connect to the computer in my home through 3389. However, the virtual IP and the virtual IP service cannot be accessed at home. My home machine can be connected via SSH. Where is the problem? Currently, PVE as the main system, with both OpenFast and OP running in parallel. Before that, OpenFast was the main system and OP and Docker were installed on the OpenFast VM. I have been working on this for two days.

The modem connects directly to the first and third ports. The second and third ports are PVE management ports. The first and third ports are WAN ports. There are two broadband lines. OpenFast connects the first and twelfth ports. The first port is LAN. OPENWRT is a bridge port, which is connected to the hard router. Other devices access the Internet through the hard router's WiFi. Currently, it looks like this. Remote network deployment is deployed on the OPENWRT system, where the virtual IP corresponding to IP 192.168.0.111 is 10.26.0.8. The current problem is that the port 22 on the virtual IP 10.26.0.8 can be accessed but not the port 80. However, ping works well. The virtual IP 10.26.0.8 can also ping well.